Troubleshooting data-logger
Pagani data-logger malfunctions and troubleshooting
- At the start of the push, no graph is generated, although numerical values are visible in the windows above the graph columns
- At the start of the test, the "tilt" value is very high (greater than 3°)
- During the test, does the data logger blink and/or suddenly turn off?
- During the test, the "tilt" value steadily increases
- During the test, the interstitial pressure value "U2" remains close to zero, showing minimal and slight variations?
- Incorrect tilt values
- The data logger turns off and restarts during the startup of the Pagani penetrometer motor
- The data-logger does not see the USB stick I inserted
- The interpretation software does not read CSV files
- The piezocone has detected QC and FS values lower or negative compared to expectations
- The test file contains three rows with identical values repeated at one-meter intervals
- The test file in CSV format is not readable with Excel
- There are more than three rows with identical values in the test file, but with different intervals compared to the meter
- U2 values higher or lower than the actual ground values
- When I connect the piezocone, all values on the "end zero reading" page show "0"?
- When I connect the piezometer, why does the value of one of the sensors on the "end zero reading" page show "0"?