It is recommended to check the battery charge status using the appropriate switch. If the voltage is insufficient, it is necessary to recharge the auxiliary battery or replace it.
For prolonged dissipation tests, it is advisable to select the option "turn off after 30 seconds" following the instructions provided in the data logger manual.
Important: a low battery voltage may cause the screen to blink intermittently or the data logger to continuously force shut down. In such cases, the device may lose Windows logs, making it necessary to send it to Pagani Geotechnical Equipment for firmware reinstallation.
If the problem persists, we invite you to contact our 24-hour support service via the following link: https://support.pagani-geotechnical.com/hc/it
If you prefer to receive assistance during office hours, please fill out the form available at the following link: https://support.pagani-geotechnical.com/hc/it/requests/new