A) Check that the lever located on the back of the machine is set to "slow" (or "snail").
B) Check that the switch located under the rubber lever controlling the hammer is set to "manual".
C) Check that the lever located on the inner left side of the frame is set to "tracks/castle", oriented towards the front of the machine.
D) Check that the green light on the control panel is on.
If the problem persists, we invite you to contact our 24-hour assistance service via the following link: https://support.pagani-geotechnical.com/hc/it
If you prefer to receive assistance during office hours, please fill out the form available at the following link: https://support.pagani-geotechnical.com/hc/it/requests/new