A) Check that the protective cover for the levers controlling the tracks is closed.
B) Check that the lever located on the inner left side of the frame is set to "tracks/castle," facing the front of the machine.
C) Check that the hammer lifting wheel (applicable only to dynamic and static/dynamic versions) is in neutral position, that is, with the cut parallel to the hammer lifting rod.
If the problem persists, please contact our 24-hour support service via the following link: https://support.pagani-geotechnical.com/hc/it
If you prefer to receive assistance during office hours, please fill out the form available at the following link: https://support.pagani-geotechnical.com/hc/it/requests/new