If the data logger does not turn on, please check the following conditions
A) Check that the red LED on the 12V socket to which the data logger is connected is on.
B) Check that the red plastic switch (battery disconnect) is set to "1".
C) Check that all fuses, located at the back of the machine in the battery compartment, are intact.
D) Check that the data logger power cable has continuity.
If the problem persists, we invite you to contact our support service, available 24 hours a day, via the following link: https://support.pagani-geotechnical.com/hc/it
If you prefer to receive assistance during office hours, please fill out the form available at the following link: https://support.pagani-geotechnical.com/hc/it/requests/new