Skip to main content

Installation of Drivers for the “ADYNLOG” Electronic Board

Updated

To ensure the proper functioning of ADYNLOG and the DYN-ACQ software, it is necessary to install the drivers provided by Pagani Geotechnical Equipment.

The driver for the “ADYNLOG” electronic board, available on the USB stick, is supplied along with the penetrometer documentation (in the “software” folder).

To proceed with the installation of the driver for the “ADYNLOG” electronic board, please follow these steps:

  1. click on the file “TI_WDF_USBUART_SINGLE_DRIVER_V6.7.2.0_WHQL”;
  2. wait for the installation to complete;
  3. at the end of the installation, keep the “Open installation folder upon exit” checkbox selected;
  4. wait for the folder containing the driver to open automatically;
  5. run the installation file “Setup.exe.”

At this point, the installation of the driver for the “ADYNLOG” electronic board will be complete.